Desiccator Cabinet Options
Nitro-Save
Solid State Sensor System for Accurately Controlling Pre-Set Relative Humidity
- Accuracy: +/- 2% at 3 to 80% RH
- Silent operation
- High reliability, no electromechanical switches
- Solenoid control valve and internal sensor system
- Sensor system activates solenoid as N2/CDA flow is required
- Continuous in-line nitrogen or clean dry air required
- Must operate at 80 PSI (min) to 100 PSI (max) for optimum performance
- Reduces nitrogen consumption to 90% (20% RH) in many applications
Electrical: 120V AC/DC. Power supply UL approved (in-house adapter may be required for foreign voltage).
This unit displays temperature as well, but it is not calibrated to monitor it.
Plenum Chamber
Purges nitrogen into compartments at an even rate. Features a removable back wall. Static dissipative desiccators include a static dissipative back plenum wall. Adds one additional inch to cabinet depth.
Flowmeter
Allows control of nitrogen flow. See Flowmeter, General Information.
#002B Flowmeter, 2 to 20 CFH
Bleeder Valve
Continuously relieves excess nitrogen. Ultra Nitro-Flow compartment flow-throughs allow for a single bleeder valve per multiple compartment desiccator.
Heavy-Duty Shelf Racks
Two required per compartment. Allows for shelf position.
Solid Acrylic Shelves
Up to 18 inch wide desiccators: 1/4 inch thick, 25 lbs. max.
24 to 48 inch wide desiccators: 3/8 inch thick, 40 lbs. max.
Perforated Stainless Steel Shelves
Required for grounding, 40 lbs. max. Perforated with 1/2 inch diameter holes for improved air flow.
Stainless Steel Plates
Required for grounding. Protects acrylic from surface abrasion. Mounted to each compartment floor.
Grounding
Grounding wire connects from hinge to hard ground in ESD desiccator. All racks, shelves, plates, latches, and hinges connect to this common ground.
Digital Hygrometer
Economical desiccator temperature and humidity level indicator, mounted in an acrylic pocket. See Digital Hygrometer.
Camlocks
Keyed alike or differently. On all doors, or specify number and location as required when requesting a quote.
Acrylic ID Pockets
Door mounted acrylic ID card holder. On all doors, or specify number and location as required when requesting a quote.
Painted Steel Stand
Heavy-duty with cross member supports for lifetime durability. Levelers or casters available. Painted class 100 steel.
Lockable Casters
Recommended for large capacity desiccator cabinets for enhanced mobility.