Showing 85–96 of 154 results
$ 30.15
Super Slim Style. Long and Slender with Pointed Tips
Overall Length (A): 5-1/2″
Tip Width (B): .010″
Tip Thickness (C): .016″
$ 19.55
Long Slender Tweezers with Pointed Tips
Overall Length (A): 5-1/2′
Tip Width (B): .010″
Tip Thickness (C): .016″
$ 41.30
Very Fine Bent Tips
Overall Length (A): 4-1/4″
Tip Width (B): .008″
Tip Thickness (C): .012″
Bent Tip Length (D): .276″
Angle (E): 30°
$ 47.95
Very Fine Tips
Overall Length (A): 4-1/4″
Tip Width (B): .008″
Tip Thickness (C): .012″
$ 49.70
5 Style Very Fine Tips, Tapered for Maximum Visibility
Conductive carbofib tips, stainless anti-magnetic handles with cushion grips.
Dimensions:
Overall Length (A): 5″
Tip Width (B): .024″
Tip Thickness (C): .016″
Angle (E): 45°
Replaceable Tip Length (L): 1.02″
Buy Replacement Tips:
$ 24
Short handle taper head micro shears with factory installed lead retainer.
Cuts soft wire up to 1.6mm / .064″ / 14 AWG
Overall Length 4.9″
Shear cutting edges – 56-58RC / Static dissipative ergonomic handles 108 -1010 Ohms/sq.
A: 0.35″
B: 0.48″
C: 0.84″
D: 0.12″
$ 9.90
Short handle, ultra slim profile ergonomic micro shears.
Cuts soft wire up to 1.0mm / .040″ / 18 AWG
Overall Length 5.11″
Shear cutting edges – 56-58RC / Static dissipative ergonomic handles 108 -1010 Ohms/sq
A: 0.35″
B: 0.55″
C: 0.74″
D: 0.08″
$ 9.65
Short handle, ergonomic micro shears with factory installed lead retainer.
Cuts soft wire up to 1.0mm / .040″ / 18 AWG
Overall Length 5.11″
Shear cutting edges – 56-58RC / Static dissipative ergonomic handles 108 -1010 Ohms/sq.
A: 0.35″
B: 0.55″
C: 0.74″
D: 0.08″
$ 16.65
Short handle, durable and versatile micro shear wire cutter.
Tough enough for harness and cables with the precision to cut material less than 1 mil. thick or work in high density areas.
Cuts soft wire up to 2mm / .078″ / 12 AWG
Shear cutting edges – 56-58RC / Static dissipative ergonomic handles 108 -1010 Ohms/sq.
A: 0.47″
B: 0.66″
C: 0.94″
D: 0.11″
$ 15.60
Short handles, extra tough high carbon steel blades.
Cuts soft wire up to 1.29mm / .050″ / 16 AWG
Overall Length – 4.88″
Shear cutting edges – 56-58RC / Static dissipative ergonomic handles 108 -1010 Ohms/sq.
A: 0.35″
B: 0.55″
C: 0.74″
D: 0.10″
$ 23.90
Designed Specifically for cutting the Kevlar Fiber Component of Fiber Optic Cables.
Heat treated cutting edges to 58-60RC.
ESD Safe Handles – Surface Resistivity 108 -1010 Ohms/sq.
Uniquely Designed Serrated edges Prevent Fibers from Sliding out of the Front while Cutting.
$ 11.25
Polyetheretherketone (PEEK) reinforced with carbon fiber tips “CP”
ESD Safe – Conductive 103 -105 Ohms/sq.
High Temperature Resistance 260-300°C
Good Chemical Resistance, Acetone / IPA Resistant
Used in soldering, as a stirring rod for solutions and as a scraper.
End of content
End of content
Load more