Desiccator Cabinets Photo Gallery –  Compare Models

TDI Desiccator Cabinets are available in clear acrylic or static dissipative acrylic. Providing the highest quality and most durable construction to meet the requirements for Cleanroom, ESD and assembly component storage applications. These desiccator cabinets feature our unique ultra nitro-flow system with compartment cut outs in walls and floors for even nitrogen distribution. Spring loaded door latches provide air-tight door seals while continuous hinges provide maximum door support. The plenum chamber option purges nitrogen into compartments at an even rate. Featuring a removable back wall for easy maintenance.Static dissipative desiccator cabinets offer stainless steel shelves, racks and plates which are common grounded to the desiccator and wire connected to hard ground. Plates are recommended on the floor of each compartment to enhance grounding and protect the surface from abrasion.

Stainless Steel Desiccator Cabinets

These stainless steel desiccator cabinets provide clean, high density storage for both clean room and assembly applications and are designed for maximum weight capacity and long term durability. These desiccator cabinets are available in a Table Top, Stacked Modules and Multi-Chamber Models. Featuring tempered glass doors with heavy duty stainless door frames. All stainless steel desiccator cabinets are available as a pass through with doors on both sides with the option of being wall mounted (please specify “pass through” in the comments section of your request for quote).

Multi Chamber stainless steel desiccators are constructed with notched chamber walls and floors, which achieve a single pressure throughout the desiccator cabinet. This eliminates the need for expensive outlet valves for each compartment, required in typical competitor desiccators.

2448SS – 2 Door
24″W x 23″D x 48″H

Cmpt: 22″W x 20″D x 22″H
Shelf Space: 21-1/2″W x 20″D

RFQ Multi-Chamber

24472SS – 2 Door
24″W x 23″D x 72″H

Cmpt: 22″W x 20″D x 22″H
Shelf Space: 21-1/2″W x 20″D

RFQ Multi-Chamber

2-#24224T – 2 Stack
24″W x 22″D x 24″H

Cmpt: 22″W x 20″D x 22″H
Shelf Space: 21.5″W x 20″D

RFQ 2 or 3 Stack

3-#24216T – 3 Stack
24″W x 22″D x 16″H

Cmpt: 22″W x 20″D x 14-1/2″
Shelf Space:21-1/2″W x 20″D

RFQ 2 or 3 Stack

Application Specific Desiccator Cabinets

Application specific desiccator cabinets for storage of specific products.  This includes wafer carriers, SMT reels, waffle packs, and bonding wire spools.  Providing the highest quality and most durable construction to meet the requirements for cleanroom and assembly component storage applications. TDI application specific desiccator cabinets are designed for in-line nitrogen or a clean dry air (CDA) source. This will furthermore assure adequate gas pressures (PSI – source to desiccator) and adequate gas volume for continued humidity control operation of the desiccator.

Waffle Pack Storage
Twice the Storage Capacity!
5 Models to Choose From

SMT Reel Storage
7″ & 13″ Tape & Reel Storage
6 Models to Choose From

Wafer Carrier Storage Cabinet
Up to 8″ Diameter Wafers
3 Models to Choose From

Bonding Wire Storage Cabinet
Upright Spool Storage
4 Models to Choose From