Why Choose a TDI Desiccator?
Our desiccator cabinets provide the highest quality and most durable construction to meet the strict requirements for cleanroom component and assembly storage applications. Designed for in-line nitrogen (N2) or clean dry air (CDA) source to assure adequate gas pressures (PSI, source to cabinet) and adequate gas volume for continued humidity control operation of the desiccator.
Superior Grade Materials
Highest quality acrylic material construction for clean room and ESD applications. All of our desiccators are constructed with 1/4″ thick acrylic material as opposed to thinner, cheaper PVC. Acrylic material for desiccators is available in clear, static dissipative, or UV amber.
Heavy duty stainless steel desiccators are constructed with 304 stainless steel with a #4B finish, offering tempered glass doors with stainless steel door frames.
Innovative Design
All TDI desiccators are constructed with compartment flow throughs, cut outs in the chamber walls and floors. Multi-compartment desiccators are able to maintain a single pressure condition throughout. This system provides maximum flow in both the vertical and horizontal directions and reduces higher moisture humidity conditions. The perforated plenum chamber purges nitrogen into all compartments at an even rate. The acrylic plenum chamber features a removable back wall for easy maintenance.
A highly efficient and economical design provides rapid recovery to preset RH% levels when the doors are opened in normal use.
When the Nitro-Save® is running with the doors open, a positive pressure of nitrogen flow extends throughout the desiccator plenum wall to all compartments and exits through the open door(s), which prevents higher humidity room air from filling back into the desiccator.
The desiccator cabinet and room atmospheric pressures are similar once the preset RH% settings have been reached. When the doors are opened, air movement between the compartments and the room is slight during the brief exposure, with minimal RH% increase inside the desiccator.
Clean rooms generally operate in a 45 to 55% RH range, which represents the highest increase condition possible inside an open desiccator compartment.
Competitive desiccator brands offer expensive moisture control systems that depend on electro mechanical switches to control moisture flow. These systems require maintenance and repair or replacement over time, with compromised reliability. Most desiccators in service have no RH% moisture control at all and often consume excess nitrogen to compensate.
Best Performance Door Design
- Closed cell neoprene, non out gassing gasket material is recess mounted into CNC pre machined slots to ensure integrity in placement.
- Spring loaded door latches on each compartment for an air tight seal every time.
- Electropolished stainless steel continuous door hinge for maximum door support.
- Vertical door stiffeners provide extra support and prevent door sagging in acrylic desiccators.
TDI's composite doors, gaskets, latches, and hinges are designed to ensure maximum air tight sealing of our desiccators, while eliminating the need for expensive stainless steel door frames. Although the doors are often the first failure point of a desiccator, TDI's composite design has proven virtually indestructible in our 25 years of providing desiccator cabinets to customers worldwide.
Most competitive brands use a thinner plastic door material. Rubber gaskets tend to be mounted onto the door rather than recessed into it, and refrigerator style latches are often used. As a result, expensive and heavy door frames are required to achieve adequate sealing.
In Conclusion
TDI offers the best of the best. Our desiccators are constructed of only the highest quality materials. They are the most durable while providing the highest density storage. At TDI we put the time and dedication into each desiccator to provide a product that will stand the test of time.