Technical Data Sheet: High Tech Plastic Type “TD”®
General Notes
- Very hard, rigid, high tensile and flexural strength, creep resistance.
- High heat capability (230 to 260°C)
- Good dimension stability, low thermal linear expansion coefficient
- Excellent chemical resistance (organic solvents, oils, grease, fuels, acids and alkalis)
- Not resistant only to hydrochloric acid and oxidizing agents
- Excellent resistance to thermal aging, very low moisture absorption
- ESD Safe Static Dissipative Material
- Microwave transparent
- Typical applications include handling of EOS/ESD Sensitive Components and handling of components during thermal, chemical and soldering processes.
Mechanical Properties
| Flexural Modulus +23°C | 11700 MPa | ASTM D 790 |
|---|---|---|
| Flexural Modulus +60°C | 10500 MPa | ASTM D 790 |
| Flexural Modulus +90°C | 8500 MPa | ASTM D 790 |
| Flexural Modulus +120°C | 6000 MPa | ASTM D 790 |
| Tensile Strength +23°C | 132 MPa | ISO 527 |
| Tensile Strength +60°C | 118 MPa | ISO 527 |
| Tensile Strength +90°C | 115 MPa | ISO 527 |
| Tensile Strength +120°C | 95 MPa | ISO 527 |
| Rockwell Hardness M | 99 | ASTM D 785 |
| Izod, Impact Strength (Notched) +23°C | 75 J/m | ASTM D 256 |
| Charpy, Impact Strength (Unnotched) +23°C | 16 kJ/m2 | DIN 53453 |
Thermal Properties
| Temp of defl. under load (1.80 MPa) | 263°C | ASTM D648 |
|---|---|---|
| Temp of defl. under load (0.45 MPa) | 278°C | ASTM D648 |
| Vicat softening temperature (50°C/h 50N) | 244°C | ISO 3068 |
| Coef. of lin. therm. expansion, normal | 2.80E-5/°C | ASTM D 696 |
| Constant Use Temperature | 200°C | 20,000 h |
| Short Time Temperature | 230°C |
Electrical Properties
| Decay Time | <0.5 sec | 1000 to 10V |
|---|---|---|
| Surface Resistivity | Low resistance limit: 10⁶ Ohm, high resistance limit: 10⁸ Ohm at 50 and 100V. Low resistance limit: 10⁷ Ohm, high resistance limit: 10⁹ Ohm at 10V |
Other Properties
| Density | 1.61 g/ccm | ISO 1183 |
|---|---|---|
| Water Absorption in Water 23°C (24h) | 0.01% | ISO 62 |