Technical Data Sheet: Engineering Plastic Type “DK”®
General Notes
- PEEK Polyetheretherketone
- Hard, rigid, high tensile and flexural strength
- Very high wear resistance
- High heat capability (260 to 300°C)
- Good dimension stability, low thermal linear expansion coefficient
- UL94V-0 self-extinguishing, without halogens or phosphorous
- Excellent resistance to chemicals and aggressive agents
- Excellent resistance to thermal aging
- Low moisture absorption
- ESD Safe Static Dissipative Material
- Typical applications include handling of EOS/ESD Sensitive Components and handling of components during thermal, chemical and soldering processes.
Mechanical Properties
| Flexural Modulus +23°C | 12000 MPa | ISO 178, ASTM D 790 |
|---|---|---|
| Flexural Strength +23°C | 220 MPa | ISO 178, ASTM D 790 |
| Tensile Strength +23°C | 150 MPa | ISO 572, ASTM D 638 |
| Izod, Impact Strength (Notched) +23°C | 30 J/m | ISO 180/4A, ASTM D 256 |
Thermal Properties
| Temp. of defl. under load (1.80 MPa) | 310°C | ISO 75, ASTM D648 |
|---|---|---|
| Continuous Use Temperature | 260°C | 20,000 h |
| Short Time Temperature | 300°C |
Electrical Properties
| Surface Resistivity | Low resistance limit: 10⁶ Ohm, high resistance limit: 10⁸ Ohm at 50 and 100V. Low resistance limit: 10⁷ Ohm, high resistance limit: 10⁹ Ohm at 10V | |
|---|---|---|
| Decay Time | <0.5 sec | 1000 to 10V |
Other Properties
| Density | 1.34 g/ccm | ISO 1183 |
|---|---|---|
| Water Absorption in Water 23°C | 0.6% | ISO 62 |