Technical Data Sheet: Engineering Plastic Type "DG"
General Notes
- POM/GF30 acetal resin reinforced with 30 wt% glass fiber.
- Good tensile and flexural strength, fatigue and creep resistance.
- Low friction, good wear and abrasion resistance.
- Low moisture absorption.
- Good chemical resistance (oils, grease, fuels, organic solvents); not resistant to strong acids, alkalis and oxidizing agents; good hydrolytic resistance (hot water).
- Insulating
- Typical applications include handling of very scratch sensitive components (ceramic and glass devices, SMD, wafers).
Mechanical Properties
| Property | Value | Standard |
|---|---|---|
| Flexural modulus +23C | 8000 MPa | ASTM D 790 |
| Flexural modulus +60C | 5700 MPa | ASTM D 790 |
| Flexural modulus +90C | 4500 MPa | ASTM D 790 |
| Flexural modulus +120C | 3800 MPa | ASTM D 790 |
| Tensile strength +23C | 83 MPa | ISO 527 |
| Tensile strength +60C | 60 MPa | ISO 527 |
| Tensile strength +90C | 53 MPa | ISO 527 |
| Tensile strength +120C | 45 MPa | ISO 527 |
| Rockwell hardness M | 85 | ASTM D 785 |
| Izod-Impact strength (notched) +23C | 55 J/m | ASTM D 256 |
| Charpy-Impact strength (unnotched) +23C | 20 kJ/m2 | DIN53453 |
Thermal Properties
| Property | Value | Standard |
|---|---|---|
| Temp. of defl. under load (1.80 MPa) | 162 C | ASTM D648 |
| Temp. of defl. under load (0.45 MPa) | 165 C | ASTM D648 |
| Vicat softening temperature (50 C/h 50N) | 156 C | ISO 306 |
| Coef. of lin. therm expansion, normal | 4.50 E-5/C | ASTM D 696 |
| Continuous use temperature | 85 C | 20'000 h |
| Short time temperature | 120 C |
Electrical Properties
| Property | Value | Standard |
|---|---|---|
| Comparative tracking index | >600 Volts | IEC 112 |
| Electric strength (2mm) | 23.0 kV/mm | IEC 243-1 |
Other Properties
| Property | Value | Standard |
|---|---|---|
| Density | 1.59 g/ccm | ISO 1183 |
| Color | White | |
| Water absorption in water 23 C (24h) | 0.20% | ISO 62 |