Technical Data Sheet: Engineering Plastic Type "CP"

mig-4e1f753d72103401.jpg

General Notes

  • PEEK/CF 30 Polyetheretherketone reinforced with 30 wt% carbon fiber
  • Very hard, rigid, high tensile and flexural strength
  • Very high wear resistance
  • High heat capability (260C to 300C)
  • Good dimension stability
  • Low thermal linear expansion coefficient
  • Excellent resistance to chemicals and aggressive agents, excellent resistance to thermal aging.
  • ESD Safe Material, low surface resistivity (105 ohms)
  • Typical applications include handling of components in cleaning, chemical, and assembly processes, also at high temperature (soldering)

This material is used in our "CP" Peek Replaceable Tip Tweezers, Wafer Handling Tweezers and Probes.

Mechanical Properties

PropertyValueStandard
Flexural Modulus +23C21400 MPaISO 178 ASTM D 790
Flexural Strength +23C350 MPaISO 178 ASTM D 790
Tensile Modulus +23C24000 MPaISO 527 ASTM D 638
Tensile Strength +23C190 MPaISO 527 ASTM D 638
Izod Impact Strength (Notched) +23C65 J/mISO 180/4A ASTM D 256

Thermal Properties

PropertyValueStandard
Temp. of defl. under load (1.80 MPa)300 CISO 75 ASTM D648
Continuous use temperature260 C20'000 h
Short time temperature300 C

Electrical Properties

PropertyValueStandard
Surface resistivity105 Ohm
Decay time<0.2 sec1000-10 V

Other Properties

PropertyValueStandard
Density1.39 g/ccmISO 1183
Water absorption in water 23 C (21h)0.01%ISO 62
Shop Tweezers