Ultra Nitro-Flow Desiccator System

TDI acrylic desiccators provide a clean, dry atmosphere to protect moisture-sensitive materials and components in storage. The cabinets require a constant dry nitrogen supply to maintain low-moisture conditions. Connect the gas supply to the nitrogen flowmeter on the cabinet. The flowmeter regulates nitrogen flow (cubic feet per hour) to the plenum chamber, and the gas is distributed uniformly through the perforated inside wall of the plenum chamber into each compartment.

mig-ceae5816de90888f.gif

Acrylic Desiccators

All TDI acrylic desiccators are built with Ultra Nitro-Flow compartment flow-throughs, achieving a single pressure and atmosphere condition throughout the cabinet. The design allows maximum gas flow in both vertical and horizontal directions and reduces higher-humidity conditions between compartments.

Stainless Steel Desiccators

TDI multi-chamber stainless steel desiccators also feature Ultra Nitro-Flow. This allows a single bleeder valve for multiple-compartment cabinets, eliminating the expensive per-compartment outlet valves required by typical competitor desiccators. The bleeder valve sits in the bottom of the lowest compartment and drains the heavier, high-moisture atmosphere. It also allows a single Nitro-Save to serve a multiple-compartment desiccator.

Why Choose a TDI Desiccator?

The Ultra Nitro-Flow system is a highly efficient and economical design. When the Nitro-Save is running with the doors open, positive nitrogen pressure extends through the plenum wall to all compartments and exits through the open doors, preventing higher-humidity room air from backfilling the cabinet.

Once the pre-set RH% is reached, cabinet and room pressures are similar, so air movement when the doors open is slight and the RH% increase inside is minimal. Cleanrooms generally operate at 45 to 55% RH, the highest possible increase inside an open compartment.

Competitor acrylic desiccators rely on electro-mechanical switches to control moisture flow. Those systems need ongoing maintenance and repair, with compromised long-term reliability, and many desiccators in service have no RH% control at all and consume excess nitrogen to compensate. The Nitro-Save Humidity Control Monitor significantly reduces the nitrogen needed to hold a pre-set relative humidity, using a solenoid control valve and internal sensor to regulate flow against the high-humidity set point.

Shop Desiccator Cabinets