Stainless Steel Desiccator Care and Use

mig-e24598557e137d67.webp

Stainless steel desiccators provide clean, high-density storage for both clean room and assembly applications. Compared to acrylic desiccators, stainless steel provides maximum weight capacity and long-term durability.

We construct our Multi-Chamber desiccators with Ultra Nitro-Flow compartment flow through, which achieve a single pressure and atmosphere condition throughout the cabinet. This unique design allows maximum gas flow as well as a single bleeder valve per cabinet.

Setup and Inspection

  • Check all screws to be sure they have not loosened during shipping.
  • The back wall screws should be snug enough to hold the wall securely, but gasketing the material should not be completely flattened.
  • Verify that all the accessories are included, per the description on the purchase order. Contact TDI Customer Service immediately should there be any discrepancies.

Placement and Maintenance

  • Do not store in direct sunlight.
  • Choose a location with easy accessibility so doors will not be hitting other objects.
  • Check doors for proper alignment. Doors usually require re-alignment as a result of movement during shipping. Re-align doors per the following: loosen hinge screws on the door to be adjusted and shift gently up or down until latch is properly aligned. Tighten screws gently but securely (power screwdrivers are not recommended).
  • Clean your desiccator with a clean soft cloth dampened with water, applying only light pressure. When cleaning cabinets with grounding tape on them, avoid wetting the tape.
  • If you purchased a desiccator with the grounding package, a grounding wire has been provided at the back of the cabinet for your convenience.
Shop Cabinets