Technical Data Sheet: Engineering Plastic Type "CP"
General Notes
- PEEK/CF 30 Polyetheretherketone reinforced with 30 wt% carbon fiber
- Very hard, rigid, high tensile and flexural strength
- Very high wear resistance
- High heat capability (260C to 300C)
- Good dimension stability
- Low thermal linear expansion coefficient
- Excellent resistance to chemicals and aggressive agents, excellent resistance to thermal aging.
- ESD Safe Material, low surface resistivity (105 ohms)
- Typical applications include handling of components in cleaning, chemical, and assembly processes, also at high temperature (soldering)
Mechanical Properties
| Property | Value | Standard |
|---|---|---|
| Flexural Modulus +23C | 21400 MPa | ISO 178 ASTM D 790 |
| Flexural Strength +23C | 350 MPa | ISO 178 ASTM D 790 |
| Tensile Modulus +23C | 24000 MPa | ISO 527 ASTM D 638 |
| Tensile Strength +23C | 190 MPa | ISO 527 ASTM D 638 |
| Izod Impact Strength (Notched) +23C | 65 J/m | ISO 180/4A ASTM D 256 |
Thermal Properties
| Property | Value | Standard |
|---|---|---|
| Temp. of defl. under load (1.80 MPa) | 300 C | ISO 75 ASTM D648 |
| Continuous use temperature | 260 C | 20'000 h |
| Short time temperature | 300 C |
Electrical Properties
| Property | Value | Standard |
|---|---|---|
| Surface resistivity | 105 Ohm | |
| Decay time | <0.2 sec | 1000-10 V |
Other Properties
| Property | Value | Standard |
|---|---|---|
| Density | 1.39 g/ccm | ISO 1183 |
| Water absorption in water 23 C (21h) | 0.01% | ISO 62 |