Comparison of Ultra Precision KD Ceramic Tip Styles
Comparison of ultra precision ceramic tweezer tip dimensions by style:
Ceramic Tweezer Tip Replacement, Alignable Tips Replacement Procedure
Easy tip replacement procedure for our high precision static dissipative black ceramic tip tweezers. Ceramic tips must be precisely aligned. This procedure ensures perfect balance and symmetry for your fine tip ceramic tweezers. In addition, replacement of these tips versus complete tweezers replacement has provided a cost of ownership reduction of 40% or more.
- First, use a small screwdriver to remove the old tips. If one tip is broken, you can replace just one tip at a time.
- Next, use the screwdriver to assemble both tweezer tips loosely. Do not tighten them until they are properly aligned per steps 3 and 4.
- Vertical ceramic tweezer tip length alignment: with new tip(s) on the handles, hold your tweezers vertically with the tips on a solid surface (Figure 1). Apply gentle downward pressure and firmly tighten the screw on the handle with the two oval holes.
- Horizontal ceramic tweezer tip alignment: close the tweezer and hold the tips between your fingers (Figure 2). Finally, firmly tighten the last screw on the handle with one oval and one round hole.
U.S. Patent #5899513
| Recommended Torque Values for TDI Ceramic Replaceable Tip Tweezers | |
|---|---|
| Ceramic Tweezer Tip Style | SA-Tweezer Handles oz F.in |
| 71 | 23 |
| 72 | 42 |
| 73 | 35 |
| 2A | 42 |
Please note: these instructions are for ceramic tip tweezers only. For fiber tip tweezers, please use the Self Aligning Replacement Tweezer Tips procedure.
KD Ceramic Tips, Standard Features
- Static dissipative zirconia ceramic tips, "KD"
- Less than 40V ESD threshold, Class 0 CDM
- Excellent transient current discharge performance
- Surface resistivity 10^6 to 10^8 Ohms/sq. at 50V and 100V threshold
- Surface resistivity 10^7 to 10^9 Ohm/sq. at 10V threshold
- Alignable replacement tips
- Enhanced break strength and surface finish
- Extreme high-temperature tip resistance to 1000 C
- High precision fine tip symmetry and balance
- Stainless anti-magnetic handles, "SA"
- Solder, chemical, solvent and acid resistant
- Lead free
MZ Ceramic Tips, Standard Features
- Insulative zirconia ceramic tips, "MZ"
- Surface resistivity, 1 x 10^12 Ohms/sq.
- Extreme high-temperature resistance to 1000 C
- Non-scratching
- Alignable replacement tips
- Stainless anti-magnetic handles, "SA"
- High precision fine tip symmetry and balance
- Solder and chemical resistant
- Lead free