Ceramic Tweezer Tip Replacement Procedure
Easy tip replacement procedure for our high precision static dissipative black ceramic tip tweezers. Ceramic tips must be precisely aligned. This procedure ensures perfect balance and symmetry for your fine tip ceramic tweezers. In addition, replacement of these tips versus complete tweezers replacement has provided a cost of ownership reduction of 40%+.
- First, use a small screwdriver to remove the old tips. If one tip is broken, you can replace just one tip at a time.
- Next, use the screwdriver to assemble both tweezer tips loosely. Do not tighten them until they are properly aligned per steps 3 and 4.
- Vertical Ceramic Tweezer Tip Length Alignment: With new tip(s) on the handles, hold your tweezers vertically with the tips on a solid surface (Figure 1). Apply gentle downward pressure and firmly tighten the screw on the handle with the two oval holes.
- Horizontal Ceramic Tweezer Tip Alignment: Close the tweezer and hold the tips between your fingers (Figure 2). Firmly tighten the last screw on the handle with one oval and one round hole.
U.S. Patent #5899513
Recommended Torque Values
| Ceramic Tweezer Tip Style | SA Tweezer Handles, oz F.in |
|---|---|
| 71 | 23 |
| 72 | 42 |
| 73 | 35 |
| 2A | 42 |
“KD” Ceramic Tip Standard Features
- Static Dissipative Zirconia Ceramic Tips, “KD”®
- Less than 40V ESD threshold Class 0 CDM
- Excellent Transient Current Discharge Performance
- Surface Resistivity 10^6 to 10^8 Ohms/sq. at 50V and 100V Threshold
- Surface Resistivity 10^7 to 10^9 Ohm/sq. at 10V Threshold
- Alignable Replacement Tips
- Enhanced Break Strength and Surface Finish
- Extreme High Temperature Tip Resistance, 1000°C
- High Precision Fine Tip Symmetry and Balance
- Stainless Anti Magnetic Handles, “SA”
- Solder, Chemical, Solvent and Acid Resistant
- Lead free
“MZ” Ceramic Tip Standard Features
- Insulative Zirconia Ceramic Tips, “MZ”
- Surface Resistivity, 1 x 10^12 Ohms/sq.
- Extreme High Temperature Resistance, 1000°C
- Non-Scratching
- Alignable Replacement Tips
- Stainless Anti Magnetic Handles, “SA”
- High Precision Fine Tip Symmetry and Balance
- Solder and Chemical Resistant
- Lead free
Please note: these instructions are for ceramic tip tweezers only. For fiber tip tweezers please use the Self Aligning Replacement Tweezer Tips procedure.